Official Luthiers Forum!

I cleaned up this #2 snakewood fretboard.
It is exactly 1/4" thick,dead straight,no bow cup or twist.
The figure is OK-but the nice thing about it is that it was cut about 4 years ago so it has stabilized and is well seasoned.
$75. plus s/h
I also have a group of 5 snakewood bridge blanks that I would like to sell as a group.
They range from OK to really nice. All 5 for $75. plus s/h
Thanks,
Brad

The fretboard sold.
I still have bridge blanks left.
If anyone is interested in them I can email pics.
To sweeten the deal I will include s/h to continental US
Thanks, BradBrad Goodman38581.3852777778

Nice looking fret board. am new here first post.

here what am working on..snakewood/walnut buildtake a look

ahhhh....a 12-string...i need to find plans for one. i could really use a 12 string. where di dyou find the plans or did you design yourself? looks great!

HI Frank

LMI have a nice set of 12 string plans.

Russell

Oh and if you decide to build one there is some good stuff in the archives on string spacing.

hey frank

No plans here, all free hand.....The mold i used is a
L-o with martin 000 sides and the rest am guessing.
or copying am fender 12.. It well be fine

[QUOTE=ron steiger]... am new here first post.[/QUOTE]
Hi, Ron!

Good to see you here! That's going to be a great looking guitar, and hope it sounds just like you want it to.

I know you're generally a fast builder, but you will have some competition for build speed here. I think I heard that John Mayes built one in 4 days, and another in 3 days! (I'm not really suggesting that you should hurry your process. Just can't wait to see it done.)

Dennis

_________________
Dennis Leahy
Duluth, MN, USA
7th Sense Multimedia

hey dennis

am in no race, on this build.

    alway good here for new ideas...and new builds
   love keeping up to date...